How To Change Wifi Settings On Ring Doorbell
The Ring Doorbell and Cameras provides 24/7 surveillance of the area in forepart of your habitation, merely it must exist constantly continued to a Wi-Fi network to do this. You may come across connexion issues, changed your Wi-Fi, or need to reconnect information technology which requires you lot to go into the settings of your Ring device.
Below are steps to change your WiFi on any Ring doorbell or Ring camera:
- Open the Band app.
- Click on the iii lines icon in the tiptop-left corner.
- Tap "Devices."
- Select your Band Doorbell or Ring Camera.
- Tap "Device Wellness."
- Choose "Change Wi-Fi Network."
- Stand up next to the doorbell or camera.
- Follow the on-screen instructions to put your doorbell in set-up mode.
- Choose your desired Wi-Fi network.
- Enter the network password and press "Proceed."
Making sure you accept a strong Wi-Fi connection is disquisitional to being able to monitor your home. There are mutual pitfalls users need to be aware of such as being on the wrong Wi-Fi frequency. If you are still encountering issues, continue reading for more troubleshooting steps.
How to Modify Wi-Fi on the Ring Doorbell
To change the Wi-Fi network on Ring Doorbell, select the device in the Ring app. Then, select "Device Health" and "Change Wi-Fi Network." Follow the on-screen instructions and enter the selected network'southward password when prompted.
Notation: Your Wi-Fi network password cannot have any special characters in information technology to connect it to your Ring Doorbell.
Ring Doorbell Fix-Up Mode
Yous must manually put your Band Doorbell in set-up mode to change the Wi-Fi network, so this cannot be done remotely. Yous can put the doorbell in gear up-up mode before y'all start the procedure in the Ring app or when prompted.
The fashion you put your doorbell in ready-upward mode depends on which Ring Doorbell model y'all have:
- Band Video Doorbell: Remove the doorbell from the mounting subclass and press the orangish button on the back of the doorbell. Exercise not concord the button downwardly.
- Ring Doorbell 2, 3, 3 Plus, and Elite: Remove the faceplate from the doorbell. And so, press the black push button on the forepart of the device.
- Ring Doorbell Pro: Press the push button on the right side of the doorbell.
You'll know your doorbell is in set-upwardly way when you see a spinning white low-cal on the front of the device.
Adjacent, follow the instructions on your Ring App to consummate the steps to connecting your Ring Device to your Wi-Fi network.
If you need to change the Wi-Fi network, but the doorbell won't go into set-up mode, you may need to perform a difficult reset:
- Agree downwardly the set-up push button for at least xxx seconds.
- And then, await at to the lowest degree five minutes for the doorbell to restart.
Only perform a hard reset if necessary as information technology volition erase your doorbell settings, and you volition have to complete the entire ready-upwardly process again.
Alternative Solution – Modify your SSID name (WiFi Proper name)
If y'all setup a new Wi-Fi network, yous can actually go to your Wi-Fi router settings and alter the WiFi Network SSID name (WiFi name) to your old Wi-Fi networks name and the Band Device will reconnect to it instead.
Choosing Ring Doorbell Wi-Fi Frequency
Many Wi-Fi routers have 2 frequencies: 2.4 GHz and five GHz. The 2.iv GHz frequency has a more extended range only a slower speed than the 5GHz one.
When choosing a Wi-Fi network for your Ring Doorbell, yous may encounter both frequencies listed as separate networks. Use the table beneath to cheque which frequency your doorbell is compatible with:
| 2.4 GHz | 5 GHz | |
| Ring Video Doorbell | Yep | No |
| Ring Doorbell 2 | Aye | No |
| Ring Doorbell 3 | Aye | Aye |
| Ring Doorbell iii Plus | Yes | Yes |
| Ring Doorbell Elite | Yes | Yep |
| Ring Doorbell Pro | Yeah | Yes |
If yous accept a dual-connexion Ring Doorbell model and a dual-band Wi-Fi router, you lot can choose which frequency you want to use. Consider using a network that has fewer devices connected to it.
For the fastest and strongest connection between your dual-ring doorbell and your Wi-Fi network, utilise the 5GHz frequency and add a Band Chime Pro Wi-Fi extender if needed.
Why Change the Wi-Fi on the Ring Doorbell?
If y'all alter your Internet access provider (Isp) or your Wi-Fi network name and/or countersign for any reason, you volition need to update your Wi-Fi network in the Ring app.
You may besides need to manually reconnect your Ring to Wi-Fi if the doorbell loses its connectedness and can't reconnect on its own. You can reconnect manually using the same steps for irresolute the Wi-Fi network.
Lastly, if your power goes out temporarily, you lot can use your telephone's hotspot to keep your Ring Doorbell operation. All you have to do is turn your hotspot on in your phone's settings and connect to it in the Ring app similar a regular Wi-Fi network.
Keep in heed that using your telephone'due south hotspot may use telephone data, so information technology's recommended to check the details of your phone plan before using your hotspot for your Ring Doorbell.
Final Thoughts
Anytime you change your Internet provider or Wi-Fi network data, you volition demand to reconnect your Band Doorbell to your Wi-Fi network.
Y'all can change the Wi-Fi network of your Band Doorbell in the Ring app. You will also need to put the doorbell in prepare-upwardly fashion past pressing the button on the back or side of the device or behind the face plate, depending on what model you take.
Demand to reset your Ring Doorbell'southward Wi-Fi instead? Cheque out this article for more than tips!
Source: https://smarthomestarter.com/how-to-change-wi-fi-on-ring-doorbell/
0 Response to "How To Change Wifi Settings On Ring Doorbell"
Post a Comment